Access Mobility Vans offers Premium Wheelchair Van products from Veigal Mobility Products and Designs in Milwaukee and Madison, Wisconsin and Chicago, Illinois and all surrounding cities.
Call today to schedule a No Obligation, Mobility Evaluation to discuss your needs and options at 1-844-945-4387
freedom of movement
Freedom of movement is a challenge that millions of people struggle with daily. We pride our selves on providing solutions that serve this need.
Our hand controls are the highest quality and most advanced designs available for accessing the vehicle accelerator and brake with out the use of lower extremities.
Our foot controls offer solutions for a wide variety of applications. Whether it be a guard to protect against accidental pedal use, an extension to bring the pedals closer to the driver or an additional pedal for people needing to drive with the left foot.
Veigel steering aids assist drivers using hand controls or drivers with low or limited hand strength. Ergonomics, leverage and environmental conditions of heat and cold are the design factors influencing the look and feel of these products.
Our transfer boards assist people in entering and exiting the driver and passenger seat allowing safe comfortable driving from the OEM seat.
We offer extension controls to assist use of gear selectors, turn signals, ignition keys or park brakes.
3300 Push Rock
Our 3300 Push Rock comes standard with a removable handle for added safety. Removing the handle disables the hand control preventing other drivers from accidentally operating the hand control. The 3300 Push Rock hand control can be configured in two ways. Our newest version the HGL for Horizontal Gas Lever changes the placement of the gas lever allowing for more legroom and clearance for the driver. The VGL for Vertical Gas Lever is a traditional configuration for the Push Rock hand control. Both the HGL and VGL versions can be configured with any of the optional handles or hand grips as listed below.
HGL – Horizontal Gas Lever
This unique design changes the orientation of the gas lever to provide more legroom and increased leverage.
VGL – Vertical Gas Lever
The VGL version is the original design of the push rock hand control. Providing smooth and easy acceleration.
The traditional handle is the original design of the push rock hand control. Anyone driving with a push rock hand control for years will recognize this handle.
The unique design of the Veigel handle limits the drivers ability to apply the gas and brakes simultaneously. Another key advantage of this handle design is that your hand is closer to the steering wheel and turn signal lever during normal operation.
5″ Vinyl Grip
The 5″ Vinyl Grip is one of our most comfortable configurations. This grip is typically paired with the Traditional handle.
The foam grip is similar in shape to the 5″ vinyl grip, but the soft foam material provides a softer feel for sensitive hands. This grip is typically paired with the Traditional Handle.
with a steady hand through the traffic
The SmartSteer multi-function steering device enables you to operate vehicle functions such as windshield wipers, turn signals, horn, head lights, etc. easily and safely while at the same time keeping control of the steering wheel. SmartSteer has been developed so that it is possible to operate the functions in any steering wheel position. The function keys can be operated easily with minimal effort. Driving becomes more comfortable and pleasant. The SmartSteer is suitable for both right-handed and left-handed drivers.
Veigel Steering Knob
The Veigel steering knob is made of durable OEM automotive material allowing it to remain comfortable temperature to touch in the heat of the summer and the cold of the winter. The ergonimic shape fits comfortably in the palm of your hand and the mounting base is small allowing it to fit in the smaller spaces of the steering wheels. Available in black or grey.
MPD Steering Knob
The Mobility Products and Design steering knob is available in black, gray and wood grain to integrate better with the vehicle interior. The mounting base is small which allows it to fit in the smaller spaces of the steering wheels.
Single Pin Foam Grip
You will like the soft foam handle grip and the smooth steering mount. The secure grip gives you comfortable control of your vehicle.
With a foam-grip single pin and foam-covered aluminum wrap providing backhand support, your hand stays securely and comfortable in place. You can easily adjust the single pin to find the steering grip thats just right for you. Easily replaceable foam covers for comfort.
Palm Grip Steering
Only Mobility Products & Designs offers you this lightweight aluminum wrap. You can adjust it to comfortably fit your hand, and its firm strength holds that shape for secure steering control. The soft, sheepskin liner protects your hand, and keeps you warm in the winter. An unique finger rest protects your fingers, plus the raised device keeps them from having little contact with the steering wheel. Ideal for arthritis suffers.
Amputee Ring Steering
Designed for those using a prosthetic hook (typical with two fingers). One finger goes on the outside of the ring, the other finger goes on the inside, securing you to the steering wheel for smooth handling.
Tri Pin Grip Steering
Your hand and wrist are comfortably secure with this lightweight three-pin grip. The pins are fully adjustable, so you can easily find your individual comfort setting. An available counter weight takes away the Tri-pin Grips weight, so you can mount it on the either side of your steering wheel. Easily replaceable foam covers for comfort.
Tri Pin Counter Balance
A Counter Balance may be used in conjuction with the Tri-Pin grip. The Counter Balance minimizes the fatigue to the driver by offsetting the weight of the Tri-Pin grip whether on an extended or short trip. This is especially important on vehicles equipped with modified steering systems. The Counter Balance is readily removeable for ambulatory drivers without tools. Standard weight is 24 oz and now available in 4 oz and 8 oz weights.
The correct pedal for your needs
Left Foot Accelerators
Electronic Left Foot Accelerator
Veigel has introduced the NEXT GENERATION of left foot accelerators.
This paradigm shift in safety now requires the trained driver to activate the left pedal prior to each use.
A separate key is required to turn the system on and a toggle switch to transfer function to the left accelerator pedal after the vehicle has been started. When done so, only the left pedal is functional. No need for an accelerator guard as the the OEM pedal (right) is not operational.
The system always defaults to the right side accelerator pedal after the vehicles ignition has been turned off.
There is no need to remove the device. As an added safety feature, when the key is removed, the system can not be turn on, eliminating the possibility of use by unintended drivers such as a valet or service technician.
We use only OEM proven circuits and accelerator pedals to ensure the highest quality and reliability of the entire system.
If your mobility equipment dealer is concerned about installing left foot accelerators due to insurance or liability concerns, the Veigel ELFA may be the solution. Please contact your local Mobility Dealer (use our of dealer locator) for more information concerning available applications
3545 Left Foot Accelerator
Our Left Foot Accelerator is easily installed using our quick release base – making it easier to remove for other drivers. It allows you to use your left foot to accelerate, while the pedal guard protects the right accelerator.
MPD Accelerator Guard
This product protects you from inadvertently resting your foot on the accelerator. It installs quickly and easily and it mounts on the same base bracket as the left foot accelerator pedal. It’s also detachable, so other drivers can use your vehicle. It is recommended for use with hand controls.
MPD Adjustable Accelerator / Brake Guard
The Adjustable Accelerator/Brake Guard has a three position adjustment feature to maximize legroom. It protects the driver from inadvertently placing their foot on the accelerator or brake pedal. It also sheilds the driver from unintentionally placing their foot under either pedal. Our product is sturdy and comes with a quick release mechanism that allows the guard to be easily removed without tools, providing full access to the factroy pedals. Guard also features a convenient carrying handle.
MPD Accelerator / Brake Guard
This control prevents the driver from inadvertently pressing the accelerator or brake pedal or placing a foot underneath either pedal.
Veigel Accelerator / Brake Guard with Trim
An important safety element that prevents unintentional use of pedals. The Veigel Pedal Guard solution is stylish and safe. This pedal guard can be removed in seconds with out the use of tools when an ambulatory driver uses the vehicle. Universal and vehicle specific applications available.
MPD Accelerator / Brake Guard Lowered Floor
This control prevents the driver from inadvertently pressing the accelerator or brake pedal or placing a foot underneath either pedal. Used in lowered floor minivans.
MPD Accelerator / Brake Guard (more clearance)
This pedal guard prevents the driver from inadvertently pressing the accelerator or brake pedal or placing a foot underneath either pedal. Has more clearance then our Standard Accelerator/Brake Guard.
Adjustable Mounting Pedestal for MPD Pedal Guard
Foot Pedal Guard Adjustable Mounting Pedestal for the MPD pedal guard to assist in Lowered Floor Van applications.
The Veigel Pedal Extensions can reduce the distance to the pedal from 2″ – 8″. Utilizing the same quick release system as the Veigel Pedal Guard, our pedal extensions can be removed in seconds without the use of tools.
Heel Shelf for Pedal Extensions
The heel shelf is designed to compliment the pedal extensions. We offer a 3 inch, 5 inch or 7 inch shelf providing shorter drivers a platform to rest to rest their feet while driving with pedal extensions. Using the same quick release system is our pedal guards and left foot accelerators, this heel shelf can be easily removed in seconds to allow access to the factory pedals.
easy to move to another seat
The Veigel transfer board bridges the gap between the wheelchair and the seat, greatly easing the transfer into and out of your vehicle. For optimal comfort and leg room, we have reduced the size of the transfer board. The board is simply folded up while driving. Removable in seconds without the need for tools. Available for driver and passenger side.
Dimensions: 13″ long by 7.5″ wide
Weight Capacity: 280 lbs.
everything within reach
Column Mount Multi-Function Turn Signal Lever Extension
This multi-function turn signal extension mounts to the trim cover of the steering column with loose fit on the signal stalk. By adding a second pivot point at the steering coloumn we have increased the functionality by allowing the driver to access OEM features available when pushing forward or back on the turn signal lever.
Right Hand Turn Signal Lever Extension
This lightweight crossover lever operates your turn signals easily. We install these products using bands, not screws, leaving your vehicles interior in its original condition.
Drop Style Turn Signal Lever Extension
This lightweight crossover lever operates your turn signals easily. We install these products using bands, not screws, leaving your vehicles interior in its original condition. This turnsignal lever can be operated while still having your hand on your hand control.
Park Brake Extension
Long, sturdy, and easy to reach, this extension makes setting your parking brake a simple task. It adjusts easily for use in a variety of vehicles.
Available in 11″ and 14″ lengths.
Gear Selector Extension
Our gear selector can be mounted on the left or right side of your steering wheel, depending on your preference. An extension means extra leverage for the right-hand location.
(The left-hand extension is not shown).
Button Style Gear Shift Lever Extension
This button style gear shift lever is designed to push side button in and shift in one easy motion – proving better leverage.
Gated Shifter Extension – Horizontal
This horizontal gear shift is designed for the newer vehicles with a gated shift. This can be used on dash mounted and counsel mounted shifters. With gated shifters, there are no buttons, allowing for better leverage and smooth shifting.
Gated Shifter Extension – Vertical
This vertical gear shift is designed for the newer vehicles with a gated shift. This can be used on dash mounted and counsel mounted shifters. With gated shifters, there are no buttons, allowing for better leverage and smooth shifting.
T-Handle Mounted Gear Shift
Our T-handle style extension enable the driver to push in the gear shift button (side mount) and move the gear shift lever in one easy motion.
Hand Style Parking Brake Handle Extension
Our hand style parking brake enables the driver to push-in the parking brake button and move the parking brake lever in one easy motion.
Key extensions are designed to provide better leverage when starting your vehicle. This product can be used anywhere that you would use a key, your vehicle, your office, your own front door.
These extensions are available for most all automotive key shapes as well as standard house keys.